MATERIALS: 2 pieces 16gauge x 1 1/2” x 6” mild steel plate

PROCEDURE:

1. Cut plate to size using a Beverly sheer or aviation snips.

2. Metal must be clean and free of impurities prior to starting project.

3. Run beads on one side of both plates as illustrated.

4. After each bead is run, allow metal to cool. This will prevent the metal from becoming too hot.

5. Inspect each bead before proceding to the next. This will allow you to correct any errors in the next bead.

6. Before welding the two pieces together tack the pieces together on each end.

7. Weld plates together.

8. Inspect beads and welds for the following criteria.

(Remember always wear proper eye protection.)

Enter name here.

Select your class period.

25 points maximum.

25 points maximum.

25 points maximum.

25 points maximum.

Total your grade here.